Installation and commissioning

This section specifies the procedures to follow during the unpacking and transportation of the Conveyor Belt (v2).

Transport

Be sure to transport the Conveyor Belt (v2) in its original packaging so that it doesn’t get damaged.

../../_images/packaging.png

Warning

../../_images/ned2_attention.png

Maintain good posture when handling the Conveyor Belt (v2) or Conveyor Belt (v2) packaging to avoid back injuries.

What the box contains

When you order the Conveyor Belt (v2) you receive a box with the following items:

Part

Image

Quantity

Description

Conveyor Belt

 ../../_images/conveyor_v2.png

x1

Niryo Conveyor Belt (v2)

Ned2 connection cable

 images/cable-connexion-ned2.png

x1

Allows you to connect the Conveyor Belt (v2) to Ned2.

Ned connection cable

 images/cable-connexion-ned.png

x1

Allows you to connect the Conveyor Belt (v2) to Ned or Niryo One.

IR Sensor

 ../../_images/IRSensor.png

x1

Detects the presence of any obstacle in front of itself.

Objects to be handled

 ../../_images/Pawns.png

x6

Handable 3D squares and circles.

End stopper

 ../../_images/Stopper.png

x1

Stops objects at the end of the Conveyor Belt (v2).

Slope

 ../../_images/Rampe.png

x1
Places a series of objects in a row and let them go to a defined

position each time an object is picked at its end.

Magnetic mechanical connectors

 ../../_images/mechanical_connectors.png

x3

Mechanical links to connect Ned2 to the Conveyor Belt (v2).

Vision Workspace landmarks

 ../../_images/Markers.png

x4

Define a workspace for the Vision Set directly on the Conveyor Belt (v2).

If you order the Conveyor Belt v2 Control box in addtion to the Conveyor Belt (v2), you will also find the following items:

Part

Image

Quantity

Description

Control box

 ../../_images/Control-Box-Button.png

x1
This Control Box allows to control the speed and direction of the Conveyor Belt (v2).

It also provides a emergency solution to stop the conveyor.

Control box connection cable

 ../../_images/cable_control_box.png

x1

Allows you to connect the Conveyor Belt (v2) to its Control Box.

Power supply

 ../../_images/Alimentation.png

x1

Power supply for the Control Box.

Intended use

Niryo’s Conveyor Belt (v2) is for educational, and research and development purposes, including:

  • learning robotics;

  • research and development in robotics;

  • simulation and prototyping of complete industrial scenarios such as “Pick & Place” (take an object to move it), “Pick & Pack” (take an object to insert it into a packaging).

The operations below do not comply with the uses set by Niryo. They include:

  • Use as a children’s toy;

  • use for industrial tasks;

  • use that exceeds the stated specifications.

Any use of the Conveyor Belt (v2) and its ecosystem that does not comply with the uses initially intended by Niryo must be expressly authorized by Niryo.

Unpacking and installation

  1. Inspect the packaging of the Conveyor Belt (v2) to make sure nothing is damaged;

  2. remove the packaging and make sure that the product has not been damaged in any way and that nothing has been mislaid during transport;

  3. put the Conveyor Belt (v2) in a location that has been specifically allocated to its use;

  4. pay attention to the commissioning and safety instructions.

Warning

../../_images/ned2_attention.png

  • Make sure the Conveyor Belt (v2) is correctly handled so it can’t fall during packing, loading, unloading or unpacking. There are handling areas to facilitate the transportation of the Conveyor Belt (v2).

Handling areas of the Conveyor Belt (v2)

../../_images/Manip_EN.png